SPRAY PAINT KIT PRO ACCORDING TO COLOUR CODE

Aerosol paint kit PRO, mixed according to your car's colour code. The kit comes with a very high quality 2K aerosol lacquer that provides a glossy, mechanically and chemically resistant surface. The 2K (two component) product is the highest quality solution when it is not possible/reasonable to use a spray gun. It is a quick and easy solution for small paint jobs at home. No compressor or other special tools required.

Supplied with the kit:

• Aerosol clear coat 2K (two component).
• Aerosol paint mixed according to your car's colour code.
• Aerosol primer

Before use, shake can for 2 minutes. Apply two thin coats and check for coverage. Add more coats if necessary, until coverage is achieved. Allow to dry for 10 min between coats. Metallic paints MUST be coated with clearcoat.

SURFACE PREPARATION:

• Sand the panel and after that, remove grease with silicone remover.
• Before painting, finish with P500-P800 sandpaper (dry) or P1000 (water, wet).
• For blending areas, use a fine scotch brite pad or P1000 disc paper (dry).
• Thoroughly clean the surface of grease and dirt with Permaloid 7010 silicone remover or PVE silicone remover, before painting.