SPRAY PAINT ACCORDING TO COLOUR CODE
Description:
Aerosol paint according to the car colour code. One can of paint (375ml) included. Recommended for use on pre-primed and/or sanded surfaces (not directly on bare metal or plastic). Clean the panel with silicone remover. Before use, shake the can for 2 minutes. Apply two thin coats and check coverage. Allow to dry for 10 min between coats.Metallic paints MUST be covered with clear coat. Coverage approx. 1m2 with two coats.
Before use, shake can for 2 minutes. Apply two thin coats and check for coverage. Add more coats if necessary, until coverage is achieved. Allow to dry for 10 min between coats. Metallic paints MUST be coated with clearcoat.
SURFACE PREPARATION:
- Sand the panel and after that, remove grease with silicone remover.
- Before painting, finish with P500-P800 sandpaper (dry) or P1000 (water, wet).
- For blending areas, use a fine scotch brite pad or P1000 disc paper (dry).
- Thoroughly clean the surface of grease and dirt with Permaloid 7010 silicone remover or PVE silicone remover, before painting.
