SOLVENT BASED PAINT W.O. SOLVENT 1L
Description:
A high quality solvent based lacquer base industrial paint. Suitable for use on all metal and plastic surfaces after appropriate surface preparation. After painting, the surface must be coated with a varnish such as Permacron or Permasolid® .
- The price of 1L PAINT (without solvent) is shown!
- For use with a spray gun, solvent must be purchased separately.
- Mixed according to your colour code
- Very good coverage
- Easy to use
- 2 to 4 coats, 10min drying time between coats (20°C).
- Clear coat can be applied 10 minutes after the last coat (20°C).
- Recommended nozzle size 1,2-1,4
SURFACE PREPARATION:
- Sand the panel and after that, remove any grease with a silicone remover.
- Before painting, finish the surface with P500-P800 sandpaper (dry) or P500-P800 (water, wet).
- Use a fine coarse grit for sanding areas or use Permahyd 1120 sanding paste and P1000 disc paper afterwards.
- Thoroughly clean the surface of grease and dirt before painting with Permaloid 7010 silicone remover, Permahyd 7080 for water-based paints or PVE silicone remover.
NOTE: The price of paint may vary if an expensive component is present in the formulation. In this case we will contact you.
